PALS 9000 System | Locators

60410-60411 | Master & Slave IRT Locator 45°

60410-60411 | Master &  Slave IRT Locator 45°

The 60410 Master IRT Locator 45° and the 60411 Slave IRT Locator 45° enclosures are designed for optimum infrared (IR) transmissions at 45 degree dispersion. They can be used as single units or assembled with multiple units using standard ½ inch electrical nipples into clusters of two to five units fanning out in all directions. The IR Locators generate a code with infrared light that is received by Actall’s PALS® 9000/L2L (PMT’s) (Personal Mobile Transmitters) (PMT). The code is easily programmed in the IR Locator and is used to identify the alarm location or zone within the system. IR Locators operate on localized power only and do not require any data runs of wiring for operation. The IR Locators can also be used for the Guard Tour option in the Crisis Controller® software. The 60411 is used in conjunction with the 60410 to increase IR coverage.

60410-60411 | Master & Slave IRT Locator 45°
  • Generates unique ID code for zoning via reliable infrared light
  • 65,000+ different locations or codes available
  • Designed for small or large areas for increased IR dispersion
  • Easy installation
  • Protective wire guard available
  • Compatible with Crisis Controller® software for the Guard Tour option
  • High and low range settings to tailor specific location and coverage needs
  • Weather resistant
  • Used in combination to increase the IR coverage area
  • Dimensions: Height: 4.5” Width: 2.75” Depth: 1.5”
  • Circuit Board: Height: 2” Width: 2” Depth: 1.25”
  • Weight: 5 lbs.
  • Power Requirements: 10-18 VDC, 300 mA power supply for 1 or 2 units, 700 mA for 4 or 5 units
  • Power Consumption: 60410: Maximum 155 mA
  • 60411: Maximum 130 mA
  • IR Range: 60410: Approximately 80’
  • 60411: 60’ High settings, indoor environments (coverage depends on lighting conditions)
  • Operating Range: 0 to 50 degrees Centigrade
  • Wiring Requirements:   3 conductors from Master Locator to Slave Locator, 22 AWG, power/data/ground, approximately 300’ distance