PALS 9000 System |

20130-E | Call Station Transmitter

20130-E | Call Station Transmitter

 

The 20130 Call Station Transmitter is a fully supervised device with two 1/4” jack inputs allowing two call cables to be attached. When the cables are removed or the buttons are depressed, the Call Station transmitter sends an alarm to the Crisis Controller® software. Not compatible or approved for UL1069 applications.

 

 

 

resident_station

  • Compatible with the PALS® 9000 systems and Crisis Controller® Software
  • Able to transmit in the harshest RF environments
  • Long range transmission
  • Allows use of two call cables
  • Extended battery life (up to 48 months depending on features and usage)
  • Full transmitter supervision includes alarms for low battery, tamper, and inactivity
  • Returns accurate RF location
  • Easy Installation
  • Back tamper for tamper protection

Dimensions: (HxWxL) 1.7” x 3” x 1.7”

Weight: ~6 oz

Battery Type: 3 V Lithium Battery, Duracell 123A

Current Consumption: 114 mA average, dependent on programmed features

Operating Temperature: 0° to 50° Centigrade

Antenna: Internal, 900 MHz

Material: Single Gang Plate ABS Plastic

Cables: Not compatible or approved for UL1069 applications.

actall-logo-web

20130-E | Call Station Transmitter

The 20130 Call Station Transmitter is a fully supervised device with two 1/4” jack inputs allowing two call cables to be attached. When the cables are removed or the buttons are depressed, the Call Station transmitter sends an alarm to the Crisis Controller® software. Not compatible or approved for UL1069 applications.

resident_station

Features & Benefits

  • Compatible with the PALS® 9000 systems and Crisis Controller® Software
  • Able to transmit in the harshest RF environments
  • Long range transmission
  • Allows use of two call cables
  • Extended battery life (up to 48 months depending on features and usage)
  • Full transmitter supervision includes alarms for low battery, tamper, and inactivity
  • Returns accurate RF location
  • Easy Installation
  • Back tamper for tamper protection

 

 

Specifications

Dimensions: (HxWxL) 1.7” x 3” x 1.7”

Weight: ~6 oz

Battery Type: 3 V Lithium Battery, Duracell 123A

Current Consumption: 114 mA average, dependent on programmed features

Operating Temperature: 0° to 50° Centigrade

Antenna: Internal, 900 MHz

Material: Single Gang Plate ABS Plastic

Cables: Not compatible or approved for UL1069 applications.